C&E-Series Heavy-Duty Trucks Taking the GIGA to the next stage

Aerodynamics&Economy

Pursing fuel efficiency in long-distance trucking

Air Deflector   TYPE-G  Variable-type

This Air Deflector features seven angle settings to match the height of the container.
It is designed to be as wide as the entire container, allowing air to flow seamlessly from the Air Deflector to the container.
The LED Signboard won’t interfere with your radio.

Standard Roof High Roof With LED Lamp Signboard
Installation Time:1.7H Weight:58.6kg
Material:Resin(FRP)
Without LED Lamp Signboard
Installation Time:1.4H Weight:56.2kg
Material:Resin(FRP)
  • *Cannot be equipped along with the Front Visor (stainless), Chromed Roof Side Grips, or any Ladder not designed for the Type-G.
  • *Costs for adding text to the Signboard are not included.

Additional Explanation

Gap Shield   For TYPE-G

This Gap Shield narrows the space between the cab and the container, helping reduce air resistance.

Standard Roof Installation Time:0.9H Weight:5.0kg
Material:Resin(FRP)
  • *For Air Deflector TYPE-G only.

Air Deflector   TYPE-B

This fixed-type Air Deflector is also available for short cabs.
The LED Signboard won’t interfere with your radio.

Standard Roof With LED Lamp Signboard
Installation Time:1.6H Weight:45.5kg
Material:Resin(FRP)
Without LED Lamp Signboard
Installation Time:1.3H Weight:42.5kg
Material:Resin(FRP)
  • *Cannot be installed along with Front Visor (stainless) or Chromed Roof Side Grips,
  • *Costs for adding text to the Signboard are not included.

Additional Explanation

Gap Shield   For TYPE-B

This Gap Shield narrows the space between the cab and the truck body, helping reduce air resistance.

Standard Roof Installation Time:1.0H Weight:6.5kg
  • *For Air Deflector TYPE-B only.

Air Deflector   TYPE-B  For Refrigerator Vehicle

This fixed-type Air Deflector is designed for refrigerator vehicles.

Standard Roof With LED Lamp Signboard
Installation Time:1.3H Weight:28.6kg
Without LED Lamp Signboard
Installation Time:1.0H Weight:25.5kg
  • *The shape of the evaporator may prevent installation.
  • *Cannot be installed along with Front Visor (stainless), Chromed Roof Side Grips, or a Gap Shield.
  • *May affect the cooling performance of integrated evaporator-condenser units.
  • *Costs for adding text to the Signboard are not included.

Additional Explanation

i-Cool Plus  (Idling Stop Cooler)

By operating an electric compressor with the battery, this idling stop cooler keeps the cabin cool even when the engine is off.

All models Installation Time:7.0H〜 Weight:63.0kg〜
  • *Additional connector harness is required.
  • *Because of the device weight, inspections for structural changes, etc.
    (reduction of tonnage) is required for registered vehicles.
  • *Use of i-Cool Plus will shorten the life of the battery. Increasing battery capacity is recommended.
  • *Removal of the Chromed Roof-side Grips is required for standard roof vehicles equipped with steps.

i-Charge   (Charging Battery)

Installing this allows the i-Cool to operate for extended periods.
The i-Charge can charge the vehicle battery, preventing the battery from being drained.

All models Installation Time:*
  • *Using i-Charge in the winter allows extended use of the Portable Electric Blanket.
  • *Installation time is 1.0 hour when being installed along with the i-Cool, or 2.5 hours when being installed alone.

Parking Heater   Webasto

This heater can be used with the engine off.
It can be used to defog the windows by setting the timer.

All models Installation Time:*
  • *Installation must be approved by authorized installer.
  • *Additional connector harness is required.

Parking Heater   Eberspaecher Smart timer

This heater can be used with the engine off.
It can be used to defog the windows by setting the timer.

All models Installation Time:*

Heat-storing Napping Mat-A  (with outlet)

This Napping Mat can store heat while the engine is running, allowing it to provide heat even when the engine is off.

All models Size:W510×L1950×H50mm
  • *Cannot be installed on short cabs.

Heat-storing Napping Mat-B

This Napping Mat can store heat while the engine is running, allowing it to provide heat even when the engine is off.

All models Size:W520×L1900×H45mm
  • *Cannot be installed on short cabs.

Portable Electric Blanket

This Electric Blanket warms up in about 10 minutes after being turned on. When the truck’s battery voltage falls below 24v, the controller battery will activate to prevent the battery from being drained.

All models Size:W1,200mm x L2,000mm x T15mm
  • *Blanket is washable.
  • *Vehicle and accessory specifications shown here are for Japanese domestic market.
  • *Please inquire at your local Isuzu dealer for details of products for your market.